2017 Gehl RS5-19 GEN:3 Telescopic Handler

Call For Price

RS5-19 GEN:3 Telescopic Handler




The RS5-19 is built to work hard.

* A rigid frame provides extra stability in the machine’s base.

* Low boom design increases operator’s visibility.

* Hydraulic hoses routed inside the boom protect them from jobsite hazards.

* Reinforced nose on the inner boom provides added strength.

* Double-wall rear tower provides extra support for increased longevity.

* Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised.

* Dana axles are proven in this application.

* SAHR (Spring-applied, hydraulic-release) parking brake located on the front brakes eliminates the adjustments and cable stretch associated with other telescopic handler models.

* Inboard wet-disc service brakes with individual bleeders for each brake.

* Limited slip differential is located on front axle.

* Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab with angle degrees.

System Pressure (bar) 3,350 psi (231)

Hydraulic System Total Capacity (L/min) 20 gpm (83)


Operator's Cabin

The operator’s cab in the RS5-19 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort.

* High-back seat with right-side adjustable armrest; suspension seat optional.

* Storage compartment under seat.

* Full 360° visibility.

* Optional air conditioning.

* Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel

* ROPS/FOPS canopy standard; ROPS/FOPS cab with heater optional



To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An

operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch

in the operator’s station.



The RS5-19 Telescopic Handler provides the power to get work done effectively and efficiently.

* Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

* Rexroth 2-speed.

* Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.

Manufacturer Yanmar

Model 4TNV98C Tier IV

Power (kW) 69 hp (50.1)

Maximum Travel Speed (km/hr) 15 mph (24)

Rated Speed 2,500 rpm



The model RS5-19 makes no exceptions when it comes to hydraulic performance. This machine can take virtually anything.

* Auto-leveling feature keeps loads level when raising/lowering the boom.

Pump Type Gear

Total Capacity (L/min) 20 gpm (83)

System Pressure (bar) 3,350 psi (231)

Hydraulic Reservoir Capacity (L) 18 gal. (68)



There is a tool for every job, and the RS5-19 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.

B Rotating Carriage – 48" (1219 mm) and 66" (1676 mm) wide.

C Fork Shift - 50" (1270 mm) wide.



The RS5-19 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance.

* The engine hood lifts fully out of the way, providing easy access to the battery and oil fill.

* A hinged access door provides easy access to the engine oil drain.

* Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for

extra protection.

* A protective sleeve over the exhaust pipe increases safety when working on the engine.

* A dual-element air filter protects the engine from airborne contaminants.

* Brake fluid level can be checked without tools.

  • Lift Capacity: 5,500 lbs.
  • Maximum Lift Height: 19'1"
  • Capacity at Maximum Lift Height: 3,000 lbs.
  • Maximum Foward Reach: 11'0"
  • Capacity at Maximum Forward Reach: 1,850 lbs.
  • Maximum Reach Below Grade: 0"
  • Manufacturer: Yanmar
  • Power: 69 hp
  • Aspiration: Natural
  • Model: 4TNV98C Tier IV
  • Rated Speed: 2500 rpm
  • Transmission: Rexroth 2-speed
  • Maximum Travel Speed: 15 mph
  • Selective Steering: 4-wheel 2-wheel Crab
  • Brakes: 2-Wheel Hydraulically Actuated Internal Wet-Disc Brake
  • Parking Brake: Spring-Applied, Hydraulic Release (SAHR) on Front Axle
  • Axle Manufacturer: Dana
Hydraulic System
  • Pump Type: Gear
  • Total Capacity: 20 gpm
  • System Pressure: 3350 psi
  • Hydraulic Reservoir Capacity: 18 gal.
General Specifications
  • Approximate Weight: 10,000 lbs.
  • Length: 12'4"
  • Width: 5'11"
  • Ground Clearance: 14"
  • Wheelbase: 7'6"
  • Turning Radius: 11'0"
  • Overall Height: 6'4"
  • Frame Leveling: N/A
  • Fuel Capacity: 17 gal.



Engine Type
4TNV98C Tier IV
Engine Manufacturer
Rated RPM
2500 rpm
Fuel Capacity
17 gal.


Max Ground Speed
15 mph
10,000 lbs.

Related Products